Motul 8100 X-Clean Gen2 5W-40 Acea C3 Full Synthetic | 504 507

DESCRIPTION;
100% synthetic lubricant approved by many manufacturers.
Specially developed for the latest generation of cars,
equipped with petrol or diesel engines, naturally aspirated or turbocharged, with direct or indirect injection,
compliant with Euro 4, 5 or 6 anti-pollution standards, which require ACEA C3 engine oil,
with high HTHS viscosity level (> 3.5 mPa.s) and with a low content of
sulphated ash (≤ 0.8%), Phosphorus (0.07 ≤ x ≤ 0.09%) and sulphur (≤ 0.3%). Mid SAPS.
Compatible with catalytic converters and Diesel Particulate Filters (DPF).
Always refer to the vehicle's use and maintenance manual before use.

SPECIFICATIONS:
– ACEA C3
– API SERVICE SP
APPROVALS;
– BMW LL-04
– MERCEDES-BENZ MB-Approval 226.5
– MERCEDES-BENZ MB-Approval 229.52
– RENAULT RN0710 – RN0700 under n° RN0710-19-62 and n° RN0700-19-75
PERFORMANCE;
– OPEL OV 040 1547 – D40, OPEL OV 040 1547 – G40,
– VAUXHALL OV 040 1547 – D40,
– VAUXHALL OV 040 1547 – G40
RECOMMENDATIONS;
– HONDA,
– HYUNDAI,
– KIA,
– MITSUBISHI,
– NISSAN,
– SSANGYONG,
– SUZUKI
Performance level;
FIAT 9.55535-S2/T2 which requires the lubricant to combine the ACEA C3 specification and the grade
5W-40 for the perfect lubrication of all petrol engines of the FIAT, ALFA ROMEO and LANCIA brands
produced from July 2007.
Engines complying with Euro 4, 5 or 6 emission standards are equipped with exhaust gas post-treatment systems.
extremely sensitive. In fact, sulphur and phosphorus inhibit the catalytic converter, making the treatment of
exhaust gases; sulphated ash clogs the particulate filter (DPF),
causing shorter regenerations, premature aging of the oil, greater
fuel consumption and decreased engine performance.

RECOMMENDATIONS;
Replacement interval: as specified by the manufacturers and to be adapted according to your use.
Do not mix with lubricants not compliant with ACEA C3 standard.
Before use, always refer to the vehicle's use and maintenance manual.

RECOMMENDATIONS;
– Viscosity 5W-40
– Density at 20°C 0.847
– Viscosity at 40°C 76.3 mm²/s
– Visibility at 100°C 13.3 mm²/s
– HTHS viscosity at 150°C 3.9 mPa.s
– Viscosity Index ASTM D2270 180.0
– Pour point -45.0 °C / -49.0 °F
– Sulphated Ash % weight 0.77